Basic Info.
Standard Component
Standard Component
Product Name
80W CO2 Laser Power Supply
Packing Size
360*225*140mm
Input Voltage
110V/220V 50Hz/60Hz
Application
60W-80W CO2 Laser Glass Tube
Transport Package
Carton Box
Specification
37cm*24cm*15cm
Product Description
SDSUNS 80w co2 laser power supply.
Laser Power Supply ZR-80W |
Input | Input voltage | AC220V±10%(AC110V specified while order) |
AC Frequency | 47-440HZ |
Output | Max Output Voltage | DC40KV |
Max Output Current | DC32mA |
Efficiency | ≥90%(Full Load) |
Response Speed | ≤1ms |
Insulation Resistance | ≥50MΩ(DC500V) |
Cooling Methods | Forced air cooling(fan cooling) |
Environmental Requested | Working Temperature | -10~50ºC |
Storage of temperature | -20~75ºC |
Relative Humidity | Max 85%RH (non-condensing) |
Altitude | 100000 feet of work,200000 feet of storage,does not work. |
Product Application
SD ZRSUNS 80 watts Laser Power Source adopt high frequency design advantages, pay more attention to every component quality for major parts, and keep high performance and duration. 80W laser power supplies were used to 70W - 80W CO2 laser tube for kinds of industrial laser system. Laser power supply produced by LinYi ZhaoRi Electronics is well known with ultra long lifetime, stability, good compatibility, as first choice in 80W CO2 laser cutter and laser engraver.
Good compatibility :
Can adapt to a number of manufacturers 80W sealed off CO2 laser tube, but also has strong adaptability and fast response, engraving, cutting benefits good effect.
Control is simple:
Select high or low level control, the use of TTL-level control of the laser can start and stop. At the same time increase the protection switch, testing is through the external water and ventilation.
Protection Function:Power supply itself has open circuit protection, a good grounding in the case of protection, the power supply to short-term work in the open state, so to avoid the laser tube burst due to the damage caused by laser power supply, thereby enhancing the laser power supply of life.
Order and deliveryWhy Choose SUNS Laser power supply?
Metal Box: Aluminum oxide metal box, good thermal conductivity, highly polished, hard
wearing, touch smart and good view.
Screws: Screws with nickel-plated and higher hardness, salt spray test up to 48 hours, not
easy to rust and to be stripped.
silicone tube: Industrial grade silicone tube to wrap high-voltage cables, this type silicone tube
containing a high proportion of silica, good insulation performance, against
moisture, hard wearing, protected high voltage effectually.
Radiator Fan: Original Taiwan Delta brand or ADDA brand, famous brand, model 8025 flow rate
FBT (Flyback Transformer): High voltage diode 25KV, 30mA, high voltage capacitor 30KV, high voltage coil withstand 7KV, quality materials warranty.
Radiation Fin: Radiation fin work surface thickness 4MM, 80W power supply radiation fin weight
≥220g, 150W power supply radiation fin weight ≥300g.
The US Regulations Terminal: The US regulations terminal (connecting pins) metal materials is nickel-plated copper (not included nail), fasten to connect, not easy to oxidize.
Thermistor: Thermistor made in Taiwan, withstand higher load and big current, good quality and
steady.
Protector Tube (Fuse): Used US brand Littelfuse, explosion proof, stable quality and reliable performance,effective protection circuit.
Safety Capacitor: Safety capacitor original imported from Japan.
Rectifier Bridge: Rectifier bridge imported from Japan, 15 ampere
Power Module: Power module is US Fairchild power chip.
Rectifier diode: Rectifier diode is Japan brand Shindengen.
Transistor: Transistor IC adopt US brand TI or Fairchild.
Power Tube: Power tube is original Japan brand Fuji Electric.
Filter Capacitor: Filter capacitor is all adopt Japan brand Rubycon, BlackGate, Nichicon etc.
Film Capacitor: Film capacitor is Japan Panasonic, or Xiamen Faratronic.
Warranty: Free 2 year warranty support, spare parts replacement
Our Company
Linyi ZhaoRi Electronics Co.,Ltd is a high-tech enterprise, located in the core area of electronically developed regions - Linyi, Shandong,China. Our company specializes in design, manufacture and sales of power supplies. The main products are switched power supply, CO2 laser power supply, co2 laser machine power source etc. The power range is from 10W to 1000W, One of our features is that products are customized according to clients requirements, and more than 90% of our products are customized in accordance with sales order.
Address:
A03 Building High-Teck Electronic Industrial Park, Tancheng, Linyi, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing Machinery
Company Introduction:
Shandong Zhaori Electronics Co., Ltd offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.